Wireless Car LED Door Projection Welcome Light 2PCS in Black Plastic

This wireless car door projection light is designed for drivers who want decorative lighting without altering the original car appearance. It uses a 3W output at 4.5V and 0.2A, and it projects a logo or signal onto the ground when the door is opened. The light turns off when the door is closed, so the effect appears only when needed. Each unit measures 6.5cm long by 6.3cm wide and 1.5cm thick, and the black plastic housing fits into a door setup where a discreet welcome light is wanted. The product is powered by 3 AAA batteries, which are not included, and it is fixed with a 3M sticker. It can be installed on both left and right doors, and it is listed as suitable for all vehicles with a choice of different logo models. The stated wick life is 80,000 to 100,000 hours, and the operating temperature range is -40 degrees to 105 degrees.

Features and Construction

The main construction points are the plastic body, the black colour, and the compact 6.5x6.3x1.5cm size. The light is made for decorative lighting and for a visible welcome effect at the door. It does not replace the car's existing lighting, and it does not require wiring into the vehicle's electrical system.

Material and Build

The housing is made from plastic in a black finish. This keeps the unit light enough to attach with a 3M sticker while still holding the projection parts in place. The light uses a 3W output at 4.5V and 0.2A. The stated wick life is 80,000 to 100,000 hours, which gives an idea of the intended long-term use of the light source. The operating temperature range is -40 degrees to 105 degrees, covering a wide span of typical vehicle conditions.

Size and Practical Fit

Each light measures 6.5cm in length, 6.3cm in width, and 1.5cm in thickness. That compact footprint makes it suitable for door areas where space is limited. The design is listed for both left and right doors, so one pair can cover two doors. If you want the effect on four car doors, you need two pairs. The lights are fixed with a 3M sticker, which avoids drilling or permanent changes to the car body.

Uses and Placement

The light is intended for auto modification, decorative lighting, and visible door projection. It is a courtesy door light that adds a clear ground display when the door opens. The placement is on the door, and the wireless battery power means there is no need to connect it to the car's wiring.

Event or Professional Use

For car shows, meets, or display settings, the projection can add a branded or logo-based detail to the vehicle. The dazzle logo light and signal light appear on the ground when the door opens, which can draw attention without changing the car's original appearance. The choice of different logo models allows the light to match the vehicle or a preferred design. The 2PCS set can be fitted to both left and right doors for a balanced look.

Everyday Home Use

In daily use, the welcome light can make it easier for passengers to notice an open door in low light. The projection is meant to give others a warning and help avoid accidents, especially when the door is open near traffic or in a busy car park. Because the light switches off when the door closes, it only operates during entry and exit. Three AAA batteries per light keep it independent from the car's electrical system, and the 3M sticker fixing keeps installation simple.

Benefits and Buying Value

The main buying value comes from the wireless battery setup, the reuse of standard AAA batteries, and the fact that no wiring changes are required. The unit is compact, black, and made from plastic, with a stated long wick life and a wide operating temperature range.

Reuse and Low Maintenance

The light is powered by 3 AAA batteries, so the batteries can be replaced when needed without replacing the whole unit. This makes the product reusable over time, provided the batteries are changed as required. The 3M sticker fixing means there is no need for complex installation tools or wiring work. The stated wick life of 80,000 to 100,000 hours supports the idea of a long-lasting light source, although actual service depends on battery condition and use.

Why Choose This Product

This wireless welcome light is a practical option for drivers who want a door projection effect without modifying the original car appearance. It projects a logo or signal onto the ground when the door opens and turns off when the door closes. It fits left and right doors, is listed for all vehicles, and offers a choice of different logo models. The 2PCS set covers two doors, while two pairs are needed for four doors. Buy two pairs at the same time if you want to avoid slight colour differences caused by interval purchases. Batteries are not included, so you will need 3 AAA batteries per light.